Schematic
BOM
DCWN06B-15 can be used instead of DCWN03B-15
Power Supply
Moderator: Heikki
Power Supply
You do not have the required permissions to view the files attached to this post.
Re: Power Supply
hello all,
I've put together a mouser cart for the psu here: https://www.mouser.de/api/CrossDomain/G ... fSub=False
omitted is the wall wart, dc power connector and switch. the wall wart listed in the BOM doesn't seem to be available anymore, are there any confirmed alternatives?
I was wondering if it's possible to run the psu off 24V rather than 36V? or alternatively omit the 15V section and run the R24-150B off a 24V supply and supply the DualCompressor with +/-17V? I have a spare soundcraft cps450/b that I'm using for various bits of outboard and the 24V rail is currently not in use and supposedly has 1.1A on it...
I've put together a mouser cart for the psu here: https://www.mouser.de/api/CrossDomain/G ... fSub=False
omitted is the wall wart, dc power connector and switch. the wall wart listed in the BOM doesn't seem to be available anymore, are there any confirmed alternatives?
I was wondering if it's possible to run the psu off 24V rather than 36V? or alternatively omit the 15V section and run the R24-150B off a 24V supply and supply the DualCompressor with +/-17V? I have a spare soundcraft cps450/b that I'm using for various bits of outboard and the 24V rail is currently not in use and supposedly has 1.1A on it...
Re: Power Supply
Here’s an alternative for the wall wart
https://www.tme.eu/fi/details/ge40i36-p ... mean-well/
You can use different wall wart voltages if you change some other components like I did here.
viewtopic.php?t=74
https://www.tme.eu/fi/details/ge40i36-p ... mean-well/
You can use different wall wart voltages if you change some other components like I did here.
viewtopic.php?t=74