Transformerless Feedforward Vari-Mu

KiCad design files

Moderator: Heikki

Post Reply
User avatar
Heikki
Posts: 92
Joined: Sat Dec 03, 2022 12:16 pm
Location: Finland
Contact:

Transformerless Feedforward Vari-Mu

Post by Heikki »

Transformerless vari-mu based on the U73 compressor/limiter.

Design files
notU73.zip
-

Schematic
73.pdf
-

Layout
73layout.pdf
-

Fully tried and tested design. I'll post measurements and more pictures later.
-

Gerber files here
viewtopic.php?t=75
-

Boards for sale
viewtopic.php?t=49
-
not73.JPG
You do not have the required permissions to view the files attached to this post.
User avatar
Heikki
Posts: 92
Joined: Sat Dec 03, 2022 12:16 pm
Location: Finland
Contact:

Re: Transformerless Feedforward Vari-Mu

Post by Heikki »

Specifications

Input impedance ≈ 12k ohms, balanced line-to-line *

S/N > 86 dB re +4 dBu, 22 kHz BW, unity gain

Frequency response = 20 - 20 kHz, ±0.5 dB

Gain = 0 dB at limit mode, 6 dB at compress mode

Output impedance = 50 ohms, balanced line-to-line
-

* INA2137 Internal resistors are ratio matched but have ±25% absolute value
User avatar
scott2000
Posts: 13
Joined: Mon Feb 06, 2023 3:54 pm
Location: Florida, USA

Re: Transformerless Feedforward Vari-Mu

Post by scott2000 »

I can make out U5 on the DCDC board pic. What model Recom is used?
User avatar
Heikki
Posts: 92
Joined: Sat Dec 03, 2022 12:16 pm
Location: Finland
Contact:

Re: Transformerless Feedforward Vari-Mu

Post by Heikki »

Recom R12-150B

Regulators for the DC-DC converters are 12V and regulator for the heaters is 5V.

R1 = 1 ohms

R2 = 2.2 ohms

R3 = 4.7 ohms

-
You do not have the required permissions to view the files attached to this post.
Post Reply